Setup question and answer thread

Help and get help from fellow racers on all your on-road questions.

Moderators: BigRed, Site Admin, Club Officers

User avatar
tamiyaracingfactory
Stock Truck
Stock Truck
Posts: 53
Joined: Fri Nov 14, 2003 10:59 am
Location: Grand Rapids, MN

Setup question and answer thread

Post by tamiyaracingfactory »

I 'm starting this thread so that we can start getting everybodies vehicles up to speed and that should help improve peoples driving skills. also this way other guys like greg m. and josh and myself can answer your questions online while your at home working on your cars(hopefully) and not trying to make drastic changes at the track. we'll try to answer your questions on motors, chassis setups, batteries and chargers, and any other stuff related to this hobby.


if your reading this, then your not making your car fast enough to beat me!!!!!!!!!!!!!!!!!!!
User avatar
Tice
Club Officer
Club Officer
Posts: 147
Joined: Wed Nov 12, 2003 9:25 pm
Location: Superior, WI

Post by Tice »

How do you fit a 19 turn armature in a stock can with bearing?
User avatar
tamiyaracingfactory
Stock Truck
Stock Truck
Posts: 53
Joined: Fri Nov 14, 2003 10:59 am
Location: Grand Rapids, MN

Post by tamiyaracingfactory »

Same size can, just replace the bushings with bearings. oops, Ishouldn't have told you that :wink: :lol: :wink: .
next question
if your reading this, then your not making your car fast enough to beat me!!!!!!!!!!!!!!!!!!!
User avatar
Tice
Club Officer
Club Officer
Posts: 147
Joined: Wed Nov 12, 2003 9:25 pm
Location: Superior, WI

Post by Tice »

Question #2 When should I hit someone? Going into a turn or coming out........which can I do without being called a hack! O wait I meant tap someone....... :lol: Please help! One more........if my 12th scale spins uncontrolable should I A: throw it in the nearest trash B: spin to the right or left C soak the entire car in traction compound D: actually learn how to set up a car. (thats to much work) E: Give it to Tim and let him fix it! So many questions.........
Dufek31t
Novice
Novice
Posts: 5
Joined: Mon Nov 17, 2003 11:18 pm
Location: Ashland, WI
Contact:

Post by Dufek31t »

so is this the thread on how to learn to bend the rules or what?!?!?! :wink:
User avatar
tamiyaracingfactory
Stock Truck
Stock Truck
Posts: 53
Joined: Fri Nov 14, 2003 10:59 am
Location: Grand Rapids, MN

Post by tamiyaracingfactory »

F. all of the above
if your reading this, then your not making your car fast enough to beat me!!!!!!!!!!!!!!!!!!!
User avatar
Tice
Club Officer
Club Officer
Posts: 147
Joined: Wed Nov 12, 2003 9:25 pm
Location: Superior, WI

Post by Tice »

You must never bend the rules no matter how much you want to......Leave that to the more experienced racers!
User avatar
tamiyaracingfactory
Stock Truck
Stock Truck
Posts: 53
Joined: Fri Nov 14, 2003 10:59 am
Location: Grand Rapids, MN

Post by tamiyaracingfactory »

o.k. so the correct answer was G. none of the above(except when josh is involved).
if your reading this, then your not making your car fast enough to beat me!!!!!!!!!!!!!!!!!!!
User avatar
Tice
Club Officer
Club Officer
Posts: 147
Joined: Wed Nov 12, 2003 9:25 pm
Location: Superior, WI

Post by Tice »

go to chat room and see what its like.......
User avatar
tamiyaracingfactory
Stock Truck
Stock Truck
Posts: 53
Joined: Fri Nov 14, 2003 10:59 am
Location: Grand Rapids, MN

Post by tamiyaracingfactory »

and no matt this not a thread on how to cheat, its a thread on how to set your vehicles so you can go faster, learn to drive better and hopefully 20 yrs down the road end up on the same lap as me. :lol: :lol:
if your reading this, then your not making your car fast enough to beat me!!!!!!!!!!!!!!!!!!!
Dufek31t
Novice
Novice
Posts: 5
Joined: Mon Nov 17, 2003 11:18 pm
Location: Ashland, WI
Contact:

Post by Dufek31t »

well i give you the vetran advantage that's for sure! :lol:
User avatar
Tice
Club Officer
Club Officer
Posts: 147
Joined: Wed Nov 12, 2003 9:25 pm
Location: Superior, WI

Post by Tice »

I think he's just dodging you Matt, thats why he's not racing a truck!
User avatar
tamiyaracingfactory
Stock Truck
Stock Truck
Posts: 53
Joined: Fri Nov 14, 2003 10:59 am
Location: Grand Rapids, MN

Post by tamiyaracingfactory »

truck, truck we don't need no stinking truck, besides sedans are where its at. :lol: :lol:
if your reading this, then your not making your car fast enough to beat me!!!!!!!!!!!!!!!!!!!
garypauna

Post by garypauna »

Tammia Boy did you set yourself for that one! just about as much finness as one of your passes! It is a good idea to always help the new and old racers that way the frustation level will stay low and they will probably come back to race. There was some real good racing on Monday night and more important than that there was a lot of laughter, way to go everyone thats the way it suposed to be, and yes Tim you drove a very good race.
User avatar
tamiyaracingfactory
Stock Truck
Stock Truck
Posts: 53
Joined: Fri Nov 14, 2003 10:59 am
Location: Grand Rapids, MN

Post by tamiyaracingfactory »

lets not understate this, I drove a awesome race and if it hadn't been for that darn draggin' wagon i would of haqd 55 laps. :lol: :lol: :lol:
if your reading this, then your not making your car fast enough to beat me!!!!!!!!!!!!!!!!!!!
Post Reply