Page 2 of 4
Re: LSRCC "Spec" Slash Class
Posted: Tue May 04, 2010 11:20 am
by BSchorr
SO whats the trick with the difs on these? Its a real pain to even get the difs out... So I only want to do it once!
Re: LSRCC "Spec" Slash Class
Posted: Tue May 04, 2010 5:24 pm
by Hammer
As far as your .18 goes just run it.
A big powerful motor is a DIS-advantage! I used to run the most HP I could get (WRONG move) now I have the smallest, cheapest, and only allow the throttle to open 2/3! Waaaay more driveable. As an example I was able to work my way from 12th to 4th in the A-main at the nitro series this past weekend with this set-up.
Re: LSRCC "Spec" Slash Class
Posted: Tue May 04, 2010 9:04 pm
by silverbullit
I think you posted in the wrong tread Dan
Re: LSRCC "Spec" Slash Class
Posted: Tue May 04, 2010 9:26 pm
by BSchorr
I was thinking that tooo!!! haha
Re: LSRCC "Spec" Slash Class
Posted: Wed May 05, 2010 6:25 am
by Hammer
Grumpy wrote:Nother thing while I am here...at the meeting I was told that since my nitro Firestorm came RTR with a .18, it was fine as long as I didn't whoop everyone constantly. Now I read the rules posted (and locked) that .12 or .15 is it. I am totally lost here guys! If I can run the truck, then that also would not be fair to the Short Course people that have to change up their RTR's. I want to get in the club and race very bad with you guys, but I am on a fixed income and can't afford a new motor for my niro, or buy a new SSC and then more stuff to go with it. I have looked around on line, and many other tracks all over are using SSC's out of the box, and are ROAR approved. But they are all a haul for me and Rose and I like the guys (and ladies) at LSRCC.
You guys need to follow along and not get caught up in it too much!!
This is ALLLL the way back from only 3 posts ago on the previous page :owned:
Re: LSRCC "Spec" Slash Class
Posted: Wed May 05, 2010 7:56 am
by Grumpy
Hammer wrote:Grumpy wrote:Nother thing while I am here...at the meeting I was told that since my nitro Firestorm came RTR with a .18, it was fine as long as I didn't whoop everyone constantly. Now I read the rules posted (and locked) that .12 or .15 is it. I am totally lost here guys! If I can run the truck, then that also would not be fair to the Short Course people that have to change up their RTR's. I want to get in the club and race very bad with you guys, but I am on a fixed income and can't afford a new motor for my niro, or buy a new SSC and then more stuff to go with it. I have looked around on line, and many other tracks all over are using SSC's out of the box, and are ROAR approved. But they are all a haul for me and Rose and I like the guys (and ladies) at LSRCC.
You guys need to follow along and not get caught up in it too much!!
This is ALLLL the way back from only 3 posts ago on the previous page :owned:
I'll retract what I said earlier here................but this did hit me wrong this morning. Specially since I read it before my coffee. But this looked like it was pointing the finger at me, and all I asked was to help the new guy that is confused over all these post changes. I am going to quit reading them and just show up and see if I can race with what I have.
Re: LSRCC "Spec" Slash Class
Posted: Wed May 05, 2010 8:52 am
by Menace
Grumpy, I'm pretty sure Hammers fun was being poked at Bullet, not you.
It looks to me like he was quoting you to prove to Bullet that he answered the right question on the right thread.
Greg
Re: LSRCC "Spec" Slash Class
Posted: Wed May 05, 2010 8:56 am
by Grumpy
Menace wrote:Grumpy, I'm pretty sure Hammers fun was being poked at Bullet, not you.
It looks to me like he was quoting you to prove to Bullet that he actually knew what he was talking about for once!
Greg
I'll wait to hear from him on that. He did use my post and quoted it, and I don't appreciate that/ BTW.........thanks again for the help over the phone!
Re: LSRCC "Spec" Slash Class
Posted: Wed May 05, 2010 9:06 am
by Menace
Any time. If you have a question just call or P.M. me, I'll try to help you with anything you need.
It's not always easy to find the right answer between all the B.S. you find on here.
Re: LSRCC "Spec" Slash Class
Posted: Wed May 05, 2010 9:12 am
by Bob P
Grumpy Hammer was talking about bullit to prove what he was saying was a fact about the .18. Hammer couldn't make the meeting due to a hang up with his constuction company work before play he called and told me he couldn't make the meeting because he had to meet with a home owner.
Re: LSRCC "Spec" Slash Class
Posted: Wed May 05, 2010 10:15 am
by WIITA
WTF, like you come on here and say things like "let's meet up and see who owns who". Sounds like your the childish one. It's jackass things like this that really piss me off. You have 2 options, show up and have a great time running what you have( like we said at the meeting) or take your ball and go home. Don't come on here and bash a guy that does a lot for this club.
Re: LSRCC "Spec" Slash Class
Posted: Wed May 05, 2010 10:22 am
by Grumpy
WIITA wrote:WTF, like you come on here and say things like "let's meet up and see who owns who". Sounds like your the childish one. It's jackass things like this that really piss me off. You have 2 options, show up and have a great time running what you have( like we said at the meeting) or take your ball and go home. Don't come on here and bash a guy that does a lot for this club.
Hey, I retracted what I said so before you jump, try looking up.
Re: LSRCC "Spec" Slash Class
Posted: Wed May 05, 2010 10:39 am
by Mecagodzilla
i hope the mods here fix witta's post, we have many familys and kids on this site. witta did you get a slash? if not shut up. we dont need you bashing new racers, that you so say your watching out for. i have helped many people get into this hobby so i do have a clue, oh yeah thanks for the great info that "tires give you traction." wow again thanks for that help. so take some advice from a bigger mouth than you, step back and think.
Re: LSRCC "Spec" Slash Class
Posted: Wed May 05, 2010 10:54 am
by WIITA
Stay classy Ron.
just focus on your open short course campaign.
Its all good, I said what I had to say.
Re: LSRCC "Spec" Slash Class
Posted: Wed May 05, 2010 11:25 am
by Hammer
Grumpy.
Menor, Robert and the rest are correct the quote was pointing out to Bullit that I posted correctly. Not sure how you misinterpreted my post but if you look back to what started this I told you "run what you have" and that it was more of a disadvantage.