Page 1 of 1

CONCOURS at World of wheels

Posted: Tue Feb 08, 2011 11:49 pm
by mikesbrother
We will be having the Concours contest at the World of wheels/Mn St On-Rd Championships.
!st ,2nd & 3rd place will be Awarded.Last year judging took place Sunday morning.
To be Judged
Any R/ C car 1/12, 1/10, 1/8 scale.
You need not race them.
No commercially painted cars allowed.
GOOD LUCK

Re: CONCOURS at World of wheels

Posted: Wed Feb 09, 2011 11:03 am
by Mikey M
Define commercially painted? I thought we had it as it had to be a raced car too. :beer:

Re: CONCOURS at World of wheels

Posted: Wed Feb 09, 2011 4:57 pm
by mikesbrother
The last couple of years we haven't had the stipulation of "must be raced" since then we have seen a wider variety of cars,Crawlers,Buggies,Trucks.

As far as "commercially painted " I am open for defining that point. :wink:

Re: CONCOURS at World of wheels

Posted: Wed Feb 09, 2011 6:27 pm
by gubbs3
I would say "mass produced." For example this would exclude any wraps you can buy that were not designed specifically for you.

Re: CONCOURS at World of wheels

Posted: Wed Feb 09, 2011 6:53 pm
by mikesbrother
What about ,no wraps,Painted only,and no mass produced.
p.s. Hi Gubbs good to hear from you.

Re: CONCOURS at World of wheels

Posted: Sun Feb 13, 2011 10:21 pm
by mikesbrother
Are we good to go ?

Re: CONCOURS at World of wheels

Posted: Sun Feb 20, 2011 8:22 pm
by pp69
In the packet that will be handed out at the door there will be a form to give some details on the car that will be in the contest. This will also help in knowing the room I will need to set up for the judges. Only cars with chassis and tires will be allowed. I am sure the judging will be on Sunday morning. Always been a tough decision to make so bring on your best.

Gary

For those that may have not attended before the World Of Wheels judges do the judging.

Re: CONCOURS at World of wheels

Posted: Fri Mar 23, 2012 11:59 am
by Mike Scott
Can I enter a steel bodied Tonka Truck if it's on a RC chassis?
or...can I enter a car that has a styrene body from a model kit that is on a RC chassis.

Re: CONCOURS at World of wheels

Posted: Sat Mar 24, 2012 11:46 pm
by pp69
lets stick with lexon.

Gary