Chill on the Hill track surface
Posted: Thu Sep 19, 2013 11:38 am
Just wondering if anyone knows how likely the track will be "glued" like it was for the SSES race? I know weather might play a factor, but just trying to get tires ready.
Lake Superior R/C Club
Remote Control Car and Truck Forum
https://lsrcc.gutowskifamily.com/forum/
Chill on the Hill track surface
Page 1 of 3
Re: Chill on the Hill track surface
Posted: Sat Sep 21, 2013 5:27 am
As nice as the traction was, tire wear was the sucks. I hope we just water it to drain the tank...
Re: Chill on the Hill track surface
Posted: Sun Sep 22, 2013 10:57 am
More than likely, run a Friday night practice, WET, so we can work on it at the same time, then close the track at the end of the night and glue it, and let the cars do their thing for the rest of the weekend, unless the weather says otherwise. =P
Re: Chill on the Hill track surface
Posted: Mon Sep 23, 2013 12:05 pm
I think gluing it would be great. With the cooler weather I don't tire wear will be as bad.
Re: Chill on the Hill track surface
Posted: Tue Sep 24, 2013 5:31 am
I had decent wear on my tires at the sses race.
Re: Chill on the Hill track surface
Posted: Sun Sep 29, 2013 9:18 pm
What is this gluing you are speaking of? and what tires would be good for a 2WD buggy then? I run on loose track so high traction is a mystery to me
Re: Chill on the Hill track surface
Posted: Mon Sep 30, 2013 12:21 pm
Elmers glue and water mixture were sprayed on the track and it increased traction, but also increased the tire wear a little. IFMAR pins, FlipOuts, basically any smaller pin type tread pattern in a soft or super soft work.
Re: Chill on the Hill track surface
Posted: Tue Oct 01, 2013 7:24 am
don't forget to pack some hole shot m4's! =)
Re: Chill on the Hill track surface
Posted: Tue Oct 01, 2013 8:06 am
When's the track work Bullitt?silverbullit wrote:don't forget to pack some hole shot m4's! =)
Re: Chill on the Hill track surface
Posted: Tue Oct 01, 2013 10:25 am
Cool Got M4 (worn) holeshots and m3(new) so I should be good thanks 
Re: Chill on the Hill track surface
Posted: Tue Oct 01, 2013 6:42 pm
Friday evening?
Re: Chill on the Hill track surface
Posted: Wed Oct 02, 2013 11:50 am
I already picked up 4 gal of glue. (Donation from my buiseness)
The kid and I will glue it Friday night as long as I can get in the box.
The kid and I will glue it Friday night as long as I can get in the box.
Re: Chill on the Hill track surface
Posted: Wed Oct 02, 2013 5:49 pm
I can be there to help and let u in, just lemme know when
Re: Chill on the Hill track surface
Posted: Wed Oct 02, 2013 5:51 pm
Of course, this is assuming it isnt raining or snowing as the forecast is showing atm...
Re: Chill on the Hill track surface
Posted: Wed Oct 02, 2013 6:33 pm
Gary's looking at a few options for this weekend. We should know tomorrow.