Help and get help from fellow racers on all your on-road questions.
Moderators: BigRed , Site Admin , Club Officers
pp69
Club Officer
Posts: 325 Joined: Thu Dec 25, 2003 12:00 amLocation: Superior, WI
Post
by pp69 Wed Dec 19, 2007 9:39 am
Yes Gubbs be right. We do allow new racers to run what they brung if they are just getting into this class but if you have to buy a body buy the club spec body Gubbs has mentioned.
BigRed
Site Admin
Posts: 753 Joined: Wed Nov 12, 2003 8:14 pmLocation: Duluth, Mn
Post
by BigRed Wed Dec 26, 2007 1:59 pm
Does anyone have a spare flanged bearing for the axle? Mine shattered taking it off the steel axle.
holshane
Club Officer
Posts: 60 Joined: Thu Feb 24, 2005 3:15 pmLocation: superior
Post
by holshane Wed Dec 26, 2007 2:20 pm
i got one josh
BigRed
Site Admin
Posts: 753 Joined: Wed Nov 12, 2003 8:14 pmLocation: Duluth, Mn
Post
by BigRed Wed Dec 26, 2007 5:09 pm
Thanks Shane. I should be there tomorrow night.
BigRed
Site Admin
Posts: 753 Joined: Wed Nov 12, 2003 8:14 pmLocation: Duluth, Mn
Post
by BigRed Fri Dec 28, 2007 9:32 am
What size bearings are those. I'll need to replace yours Shane.
Luckyp
Club Officer
Posts: 39 Joined: Tue Aug 15, 2006 5:12 pmLocation: Poplar, WI
Post
by Luckyp Fri Dec 28, 2007 10:35 am
1/4 x 3/8 flanged, I believe.
Hill-Billy Hotwheels Racing
mikesbrother
Club Officer
Posts: 144 Joined: Mon Apr 03, 2006 10:51 pmLocation: Superior,WI
Post
by mikesbrother Wed Jan 16, 2008 7:16 am
We race a 2wd street spec.The car on RC tech is a 4wd sedan.
Rusty
Novice
Posts: 10 Joined: Wed Feb 28, 2007 11:06 pmLocation: Hastings, MN
Post
by Rusty Wed Jan 16, 2008 4:01 pm
My bad
Rusty Andersen
pp69
Club Officer
Posts: 325 Joined: Thu Dec 25, 2003 12:00 amLocation: Superior, WI
Post
by pp69 Wed Oct 08, 2008 5:57 pm
Lets hear some body ideas for the Club Spec Class this year. If you want to get a good deal on bodies I have to place an order in a couple of weeks.
silverbullit
Club Officer
Posts: 201 Joined: Mon Nov 17, 2003 11:34 pmLocation: Superior, WI.
Post
by silverbullit Wed Oct 08, 2008 7:04 pm
Lamborgini bodies! I want to see those rip around the track
Michael J. Johnson
mikesbrother
Club Officer
Posts: 144 Joined: Mon Apr 03, 2006 10:51 pmLocation: Superior,WI
Post
by mikesbrother Wed Oct 08, 2008 9:44 pm
I have my truck painted already, but lamborghini's sound cool.
gubbs3
Novice
Posts: 36 Joined: Thu Jun 01, 2006 12:41 amLocation: Duluth, Coon Rapids, MN
Post
by gubbs3 Wed Oct 08, 2008 10:14 pm
Make it like the world GT class. It would be sweet to see a bunch of 2-door sports cars sailing around the track. With a 200mm body I think the rear tires would only stick out about 2mm each side.
silverbullit
Club Officer
Posts: 201 Joined: Mon Nov 17, 2003 11:34 pmLocation: Superior, WI.
Post
by silverbullit Thu Oct 09, 2008 12:24 am
gubbs3 wrote: Make it like the world GT class. It would be sweet to see a bunch of 2-door sports cars sailing around the track. With a 200mm body I think the rear tires would only stick out about 2mm each side.
+1
Michael J. Johnson
double trouble
Stock Truck
Posts: 79 Joined: Sat Feb 28, 2004 6:18 pmLocation: Superior, Wis.
Post
by double trouble Thu Oct 09, 2008 9:26 am
Thanks.
I will be out 40.00 bucks, my two bodys are painted and ready to go. I was hoping that if this is the last year on these chassie's that it would end the same way it started with the truck body. You guys do what you want. I will wait till after the meeting and see what we will do. If you change I will sell my two spec's. Just my thoughts.
I will be out 40.00 bucks, my two bodys are painted and ready to go. I was hoping that if this is the last year on these chassie's that it would end the same way it started with the truck body. You guys do what you want. I will wait till after the meeting and see what we will do. If you change I will sell my two spec's. Just my thoughts.